Please Read the forum Rules before you register. Thank you for your Registration and we wish you to have a nice stay!

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Op-Com Repair Tool
16-06-2014, 10:16 AM
Post: #11
RE: Op-Com Repair Tool
Mate you cannot do it
Don't waist your time
Original softwares cannot be activated.
It is need online activation and a genuine tool too
HQ clone can works with lastest op-com/vaux-com softwares ( the lastest firmware for english version is 1.60 )
This is the only one possibility to have the lastest version of op-com working
The lastest version of softwares that it works with any clone it is VAUX-COM 120309a and it was shared here
By the way if your tool it was bought recentlly as 1.45 then open it up and see if it has PIC18F458 original Microchip
If it has a MCU that it is write anything else diffrent on it or it then do not try to upgrade or downgrade it. You'll block it
Good luck

From 1st to 31th of August I will be in holiday
Please do not send me any mesages because I will not replay
Good luck
Reputation: +2 - titoun [+1] , pictorino [+1]
Find all posts by this user
Like Post Quote this message in a reply
The following 3 users Like mattydr67's post:
23Andi23 (06-17-2014), Phanter (06-19-2014), pictorino (06-17-2014)
 Thanks given by: mawohigev , coriducu , mdanilo , paro44 , titoun , pictorino , Phanter
17-06-2014, 12:09 AM
Post: #12
RE: Op-Com Repair Tool
(16-06-2014 10:16 AM)mattydr67 Wrote: Guests cannot see links in the messages. Please register to forum by clicking here to see links.Mate you cannot do it
Don't waist your time
Original softwares cannot be activated.
It is need online activation and a genuine tool too
HQ clone can works with lastest op-com/vaux-com softwares ( the lastest firmware for english version is 1.60 )
This is the only one possibility to have the lastest version of op-com working
The lastest version of softwares that it works with any clone it is VAUX-COM 120309a and it was shared here
By the way if your tool it was bought recentlly as 1.45 then open it up and see if it has PIC18F458 original Microchip
If it has a MCU that it is write anything else diffrent on it or it then do not try to upgrade or downgrade it. You'll block it
Good luck

Hello mattydr67,

Thank you for your post. Yes i have a 18LF458 Microchip. Is that means i can upgrade and use 131223c ? Can you show me how?

I have 1.45FW and i can use 120309a. but as you know i am trying hard to use 131223c.
Find all posts by this user
Like Post Quote this message in a reply
17-06-2014, 04:59 AM
Post: #13
RE: Op-Com Repair Tool
Hi again
You ask: "Yes i have a 18LF458 Microchip. Is that means i can upgrade and use 131223c ?"
- If your tool is opcom v5 hardware with real Microchip PIC18F458 then the tool need to be upgraded to the HQ clone to be able to use moded softwares for it as 131223c or 131223d
This tool support firmware upgrade/downgarde
To upgrade this tool to become a HQ clone it is need to be flashed
You ask "Can you show me how?"
I belive that it is not such a easy.
The easiest way is to buy a HQ clone
Good luck

From 1st to 31th of August I will be in holiday
Please do not send me any mesages because I will not replay
Good luck
Find all posts by this user
Like Post Quote this message in a reply
The following 2 users Like mattydr67's post:
23Andi23 (06-17-2014), pictorino (06-17-2014)
 Thanks given by: paro44 , titoun , pictorino
17-06-2014, 06:59 AM
Post: #14
RE: Op-Com Repair Tool
(17-06-2014 04:59 AM)mattydr67 Wrote: Guests cannot see links in the messages. Please register to forum by clicking here to see links.Hi again
You ask: "Yes i have a 18LF458 Microchip. Is that means i can upgrade and use 131223c ?"
- If your tool is opcom v5 hardware with real Microchip PIC18F458 then the tool need to be upgraded to the HQ clone to be able to use moded softwares for it as 131223c or 131223d
This tool support firmware upgrade/downgarde
To upgrade this tool to become a HQ clone it is need to be flashed
You ask "Can you show me how?"
I belive that it is not such a easy.
The easiest way is to buy a HQ clone
Good luck

I can do soldering and flashing but i need hex and moded softwares 131223c or 131223d. And i can not find anywhere
Find all posts by this user
Like Post Quote this message in a reply
17-06-2014, 07:23 AM
Post: #15
RE: Op-Com Repair Tool
And you'll not find it anywhere mate
There's no an uniq hex file for this.
Belive me take my advise and don't waist your time
It is not as you think
Buy a HQ clone and you'll smile then
Good luck

From 1st to 31th of August I will be in holiday
Please do not send me any mesages because I will not replay
Good luck
Find all posts by this user
Like Post Quote this message in a reply
The following 1 user Likes mattydr67's post:
23Andi23 (06-17-2014)
 Thanks given by: paro44 , coriducu
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
KOpel REPAIR ERASED OP-COM CLONE BOOTLOADER FROM PIC18F458 MCU in fantomel 39 2,819 20-07-2014 05:00 PM
Last Post: xpirat

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content